Solid G and 8700G - AllMYRC.com-A Radio Control Helicopter, Airplane and Car Community

Jhaase · 05-15-2010, 07:57 PM

Hi Curtis,

I am having trouble with 8700G and Solid G combo. I have this same setup on 2 helis with the exact same behavior. Using 9303 radio when I power on the reciever the servo arm moves to full deflection and binds the pushrod until the reciever connects with the radio. As soon as reciever connects, the servo moves to the correct posititon and everything works perfect.
Heli 1 T-rex 600 using 921 reicever and Heli 2 Vibe 90 using 7100R
Hopefully this is just something I'm missing.

Thanks
Joel

govanator · 05-16-2010, 04:07 AM

Try binding the receiver again. This time remove the bind plug from the receiver before you turn on the transmitter with the bind button pressed. This will set fail safe on the receiver.

Bobby

Jhaase · 05-16-2010, 05:58 PM

Hi bobby,

I tried what you suggested and it still does the same thing.

If I plug the servo directly into the reciever it will not move like it does with the solid g plugged in.

05-15-2010, 07:57 PM	#1 (permalink)
Jhaase AllMYRC Newbie Join Date: Sep 2009 Posts: 3 Mood:	Solid G and 8700G Hi Curtis, I am having trouble with 8700G and Solid G combo. I have this same setup on 2 helis with the exact same behavior. Using 9303 radio when I power on the reciever the servo arm moves to full deflection and binds the pushrod until the reciever connects with the radio. As soon as reciever connects, the servo moves to the correct posititon and everything works perfect. Heli 1 T-rex 600 using 921 reicever and Heli 2 Vibe 90 using 7100R Hopefully this is just something I'm missing. Thanks Joel

05-16-2010, 04:07 AM	#2 (permalink)
govanator AllMYRC Newbie Join Date: Nov 2009 Posts: 6 Mood:	Binding Process Try binding the receiver again. This time remove the bind plug from the receiver before you turn on the transmitter with the bind button pressed. This will set fail safe on the receiver. Bobby __________________ www.propnuts.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-16-2010, 05:58 PM	#3 (permalink)
Jhaase AllMYRC Newbie Join Date: Sep 2009 Posts: 3 Mood:	Hi bobby, I tried what you suggested and it still does the same thing. If I plug the servo directly into the reciever it will not move like it does with the solid g plugged in.